SoCalLogo.jpeg

Home | Desert-Raid Cars | Join Us! | Products | Contact Information | DRM

Sand and Desert Buggy Models

In the Sand or the Desert, a Desert-Raid Motorsports buggy will never leave you walkin'!

P1010061.JPG

P1010058.JPG

P1010052.JPG

SoCal-SandCar -Base level car

Upgrades can be made to fit any specific application. As the look of each level of car is slightly different, you have the ability to make every car as tough and “High-Line” as you wish.

 

-1 ”X.095 1020 Grade DOM Frame

-1 ”X.120 4130 Chromoly A Arms & J Arms

-4130 dual vert-heim spindles

-4130 Chromoly, plate-reinforced, tube Trailing Arms

-Pro-Am Billet HD Rack & Pinion

-Chromoly tie-rods w/ 4130 Rod Ends

-Steering assembly, joints and linkage (includes quick-disconnect steering wheel)

-Pro-Am 930 Micro Stub Assemblies with disk brakes with 4 Piston calipers

-Chromoly half-shafts

-Aluminum floor pan

-Jamar Billet Super-shifter

-Adjustable CNC Pedal assembly

-Steel braided brake and clutch lines

-Battery with custom battery box

-Aerotank 12—17 gallon aluminum fuel tank

-Douglas aluminum Wheels (sand)(or BMI Race Series desert wheels)

-Sand Tires Unlimited 14.50 Paddles & 7.80 Razor Tires (or Desert King 33x10.50 by Mickey Thompson)

-Highback Mastercraft suspension seats with Headrest

-48” rear Bench with headrest (on four-seat model)

-Drivers Seat Slider

-Crow or Mastercraft 5 point harnesses

-Front & Rear 2.5 “Pre-Runner” Dual-Rate Coil-over King Racing Shocks

-Light package: 4 X Lazer Star 100 watt Fronts and custom LED Brake/Tail light

-Side Panels, Console, Roof, Wing

-Autometer Gauges

-Powder coated chassis and suspension

-Powder coated coil-over springs

-Subaru 2.0L turbo 230 HP engine

-Built Wright 002 Bus transmission

 -Billet grab-bars and steps

 

Sand Assault/Desert Assault-Mid level car   

Upgrades can be made to fit any specific application. As the look of each level of car is slightly different, you have the ability to make every car as tough and “High-Line” as you wish.

-1 ”X.095 4130 Chromoly Frame

-1 ”x.120 4130 Chromoly A Arms & J Arms

-4130 Dual vert-heim spindles

-4130 Chromoly, plate-reinforced, tube Trailing Arms

-Pro-Am Billet HD Rack & Pinion

-Aluminum tie rods w/ 4130 Rod Ends

-Steering assembly, joints and linkage (includes quick-disconnect steering wheel)

-Pro-Am 934 CV Hub Assemblies with disk brakes and 4 piston calipers

-Pro-am Front disk brakes with 2 piston calipers

-300M Half-shafts

-Perforated steel Floor

-Jamar Billet Super-shifter

-Adjustable CNC Pedal assembly

-CNC Cutting Brake

-Steel braided brake and clutch lines-Choice of color

-Battery with custom box

-Aerotank 18 gallon aluminum fuel tank

-Douglas Billet wheels w/beadlocks in rear (sand)(or BMI Race Series desert wheels)

-Sand Tires Unlimited 35 Paddles & 8.0 Razor Tires (or Desert King 33x10.50 by Mickey Thompson)

-2" Wider Mastercraft Highback suspension seats with Headrest

-Adjustable Driver seat

-Rear Bench with Headrest or two more suspension seats W/rear center console

-Crow or Mastercraft 5 point harnesses

-Front & Rear 2.5 “Pre-Runner” Dual-Rate Coil-over King Racing Shocks

-Rear 2.5 Triple-Bypass King Racing Shocks

-Light package: 4 X Lazer Star 100 watt Fronts and custom LED Brake/Tail light

-Autometer Gauges

-Side panels, roof, console, radiator scoop and switch panel

-Powder coated chassis & suspension

-Powder coated springs

-Billet grab-handles & Full Length Side Steps

-470HP 5.3L LS1 V8 Motor

-Mendeola E Model Transmission

-PWR or Ron Davis Radiator with Dual SPAL or Marydyne fans

 

Sand Slayer/Desert-Slayer-Upper level car

Upgrades can be made to fit any specific application. As the look of each level of car is slightly different, you have the ability to make every car as tough and “High-Line” as you wish.

-1 ”X.095 4130 Chromoly Frame

-1 ”X.120 4130 Chromoly A arms & J Arms

-Full Dressed aluminum side panels, roof, wing trunk, hood, dash & center console

-Over 500HP LS1/LS2 V8 Corvette Motor

-Mendeola S4 Sequential Transmission

-Pro-Am Mid Board Hub assemblies with disc brakes and 6 piston calipers

-Pro-Am Front Racing hubs with disc brakes and 4 piston calipers

-4130 Spindles with 1” Uniballs

-CNC Pedal assembly

-CNC Cutting Brake

-High Pressure Steel Braided Lines colored–black, red, blue or clear

-2.5” Howe Class 1 Power Rack & Pinion Steering System

-MOMO or Grant Steering Wheel

-Steering assembly, joints and linkage (includes quick-disconnect assembly)

-Front & Rear 2.5 “Pre-Runner” Dual-Rate Coil-over King Racing Shocks

-Front & Rear 2.5 Triple-Bypass King Racing Shocks

-Aerotank Custom 18—25 Gallon Fuel Tanks

-PWR or Ron Davis Racing Radiator with Dual SPAL or Marydyne Fans

-Race-style digital gauge cluster

-Water-Proof switch assembly

-2" Wider Racing Suspension Seats with adjustable headrest

-Rear Bench with Headrest or two more suspension seats W/rear center console

-Crow or Mastercraft 5 point harnesses

-Full Perforated-Stainless Steel floor pan W/Aluminum or Chrome steel skid-plates front and rear

-NICE Billet wheels w/ Front & Rear Beadlocks

-Sand Tires Unlimited Sandblaster 38 Paddles with 10.80 Fr (or Desert-King 35x12.50 By Mickey Thompson

-Light Rack W/4 HID Off Road Lights

- Light package: 4 X Lazer Star 100 watt Fronts and custom LED Brake/Tail light

-Matching seat and interior upholstery

-Lowrance GPS

-PCI Communication System (4 headsets standard)

-Powder coated chassis & suspension

-Powder coated coil-over springs

 

The Desert-Raid    $100,000 And Up

Basically, take the Desert-Slayer and beef it up to damn near Race-Specs, and you’ll realize that this car has the best of everything, from steel to high performance components and top-of-the-line accessories, and is completely customizable to your specifications and manufacturers. Plan a couple of hours for choosing components and accessories, and understand that this car will take longer to build based on the availability of parts.

-1 ”X.120 4130 Chromoly Chassis-Tig Welded

-Laser cut Chromoly plate A arms and 1 ”X.160 4130 Upper control arms

-1.5” Pro-Am Uniballs

-2.5 Front & 3.0 Rear King Race Series Dual-rate Coil-overs

-2 ” hollow spindles

-Pro-Am Race series front hubs with disc brakes and 4 piston calipers

-Rear Pro-Am 34 Series Floater hubs with disc brakes and 6 piston calipers

-Howe Diablo Rack & Pinion

-Fiberglass body

-Ron Davis or PWR racing radiator with Dual SPAL or Marydyne fans

-Billet Wheels w/ Beadlocks

-Custom LED brake and rear running lights

-Light rack with four HID lights

-Fire extinguisher

-35X12.50 Desert-King Tires by Mickey Thompson

-Skid plates made from ” Steel or diamond plate

-PCI Race radio system

-Race style Lowrance GPS

-Custom interior to your specs-Race Style or Comfort Style

-CNC Pedal Assembly

-MOMO or Grant steering wheel

Enter supporting content here

SoCal-Sandcars 909 821-1681 or  909 383-0499 Fax